|
Here are some reference circuits and projects, as well as other information I may want to share about my electronics hobby.
Over-engineered fan controller
I used a LM35 as a probe (10mV/Celcuis). The whole thing is quite large, but has a bar-graph display of the temperature.
Square wave generator
I needed an accurate square wave generator, so I built this. It can divide the oscillator output (8MHz) by 1-255 and then again by 2, 4, 8... up to 256.
Switch mode step down regulator
I use this reference circuit a lot, my version produces 5V from almost any input (4V to 14V). I found I had to put a bypass resistor on the inductors to improve performance, but I don't know exactly why.
It has a maximum current output of around 100mA. The inductor used was 10uH.
Negative rail generator
This reference circuit produced a -24v rail. Again it it limited to 100mA and requires a supply of around 24v . It is quite tolerate of supply variation. Of course, you now have a 48v drop, so driving 100mA will get things a little warm.
The induction was 1mH and again a bypass resistor help with performance.
Rather boring bit...
Semiconductor list
|